This is a technical but concise treatment of the way sails work. See what you can take away from this and apply to sail trim underway.
Click here to download a PDF of this article
Your Custom Text Here
Learn about ALL the skills needed for sailing and seamanship. We have knot tying videos, guidance on anchoring at Catalina Island, fun sailing videos and more.
This is a technical but concise treatment of the way sails work. See what you can take away from this and apply to sail trim underway.
Click here to download a PDF of this article
Click here to download a PDF of this article
You've heard this before, right? “When in doubt, let it out.” You’ve no doubt even said the same thing to your crew. But, have you wondered exactly why it’s so important? The questions I get in my Basic Cruising classes remind me that knowing how and why things work is an important part of the foundation one needs.
So, why let the sail out until it luffs, and bring it back in until it stops luffing? Why ease the genoa sheet two inches so the leeward telltales lay back in line with the windward telltales? It's because that’s where the power is. As the old saying goes, “Any time two sailboats are in sight of one another, it’s a race.” That may not be true for everyone, but it’s fun to go fast! And, better sail trim just might make the difference in getting to Catalina before sundown. Take a look at the image below. This sail is over-trimmed, and needs to be eased out.
The Over-trimmed Sail
Wind comes from the right hand side
The sail trimmer’s goal is attached, laminar airflow. The most common sail trim error made is to over-trim, meaning, to have the sails in too tight. The photo above shows what airflow over the sail looks like when it is over-trimmed. Note the turbulence of the separated flow on the leeward side of the sail - lift is reduced, and drag is increased. That’s slow! When you see your leeward telltales lifting and fluttering, this is what’s happening.
There is much more to race-winning sail trim than this, but use the following procedure to get your basic trim in the right ball park: